How to Recover Data from a Damaged Hard Drive

A sophisticated hard drive data recovery program can restore files and repair faulty disks. WinfrGUI recovers data from system failures and boot issues. This free data recovery software recovers data from damaged hard drives.

Follow these simple procedures to restore damaged hard disk files:

• WinfrGUI settings first.
• Choose the hard disk to recover data from and click “Scan.”.
• Check and choose the file to recover. Click “Recover” to begin recuperation.

If your hard drive does not respond to the strange “biz biz” sound when booted up and eventually completely shuts down. It is possible that the hard drive is dead already.

Dead hard drive indicators may include strange noises, frequent computer crashes, disk-related issues, data loss, and driver identification problems. However, don’t be afraid. Try exploring how to recover data from a dead hard drive using the following methods.

Part 1: Possible ways to recover data from dead hard drives

It is not unusual for a computer user to encounter dead hard drives. Losing important files such as photos, music, and documentation can be painful. Luckily, there is hope until the files are not severely damaged. I recommend having an emergency plan that involves using a CD or DVD with hard disk recovery software if you haven’t already done so and if the drive components are still working.

Quick Tip: Make sure that the disk is recognized as online and that the partition or disk space is accurately displayed. If the disk can’t be recognized as an online drive, please see Section 3.

Part 2: Data Recovery from Dead Hard Drive

WinfrGUI is useful for system or boot failure data recovery. Data recovery from dead hard disks follows these steps:

• Step 1: Choose the scan range and reset location.
• Step 2: Choose a scanning mode and file type under “Advanced Settings”.
• Step 3: Click “start recovery” to begin recovery.

This free software can load data from dead hard drives, residential disks, dynamic discs, memory cards, and many other storage media. It can also recover data deleted from partitions. Recover earlier Excel files, as well as images, documents, and video files.

Part 3: Solving the connection to the hard drive.

In the case that your hard drive is not recognized as “online,”  there are several possible causes and consistent solutions that often prove effective.

Case 1: The hard drive will display “ONLINE (ERRORS)”

The dynamic drive will specify “online (error)” when there is an input/output defect. Most of the disk files are considered “in danger”. Follow these steps to solve the problem:

Check that there is a power cord or circuit and restart the disk if an I/O error is found.

If the disk remains in a “healthy (at risk)” condition, it may be damaged. Buy a new disk and back up your data immediately.

Case 2: Hard drive “not started”

The “uninitialized” CD has no viruses or signatures. Follow these steps to solve this:

• Make sure that the hard disk works on another computer. Go next if no computer works.
• Just right-click the disk and choose “Start disk.”. Mark the preceding “offline” disk “online.”.

Case 3: The hard drive “disappeared.”

When the drive is destroyed, turn it off or remove it. It may be labeled as “missing” to enable the new disk. Follow these steps:

• Open “Disk Manager” to detect and activate missing disks.
• Right-click on the missing disk and select “Open the disk again.”.
• Restarting the drive in the disk management system should fix this problem.

Case 4: The disc will appear as “Foreign.”.

To make the disk appear “foreign.”. Please transfer dynamic files from another computer. This situation can occur if you are using Windows XP Home Edition with a dual boot system and dynamic file. Follow these steps to solve the problem:

Use the “Import Foreign Disk” function to import the disk. Importing the disk will not cause data loss.

Part 4: Solution for repairing broken or dead hard drives.

Consider the following solution to fix your broken hard drive:

Solution 1: Repair the drive.

If your disk has a bad partition or an error, the CHKDSK tool on your PC can help solve the problem. Follow these steps to fix a hard drive that is not working:

• Click Win+X to access “Command Prompt (Admin).”
• Click “Yes” when prompted to open an admin command.
• Use the command “chkdsk” along with the character of the broken hard drive (e.g. “CHKDSK c: /f /r /x”) to verify the error and fix it.

Solution 2: Fix crashed non-system drives with the file manager

Launch the file manager by pressing “Win + E” and then right-click on the problem drive in the left menu. Select “Tools” > “Check Errors” from the “Properties” menu. After checking it, click “Repair This Drive” to fix driver-related issues.

Solution 3: Run a full disk scan.

• Access “This PC”. Right-click on the hard drive and select “Properties.”.
• Click on “Check” in the “Tools” tab, then select “Checking Errors.”
• Close all applications and allow the system to scan the disk during startup.
• Once the scan is complete, restart your PC.

If the report indicates that there are “bad sectors or groups,”  use the CHKDSK command from Solution 1 to solve this problem.

Conclusion

To recover data from damaged hard drive is difficult. Before hiring an expert, try the following strategies and look for inexpensive alternatives. After recovering your data from your old hard drive, please get a new one to protect your data.